THE XEROX 3030 ENGINEERING COPIER A Powerful Package: Plain Paper Productivity Where You Need It... When You Need It.

The Xerox 3030 Engineering Copier is a point-of-need plain-paper copier that’s compact, aesthetically pleasing and environmentally friendly. The 3030 gives you walk-up convenience, automatic operation and a clear, easy-to-use graphic interface.

A World Of Copying Options — At The Point Of Need. Copy from original drawings, bluelines, sepias, CAD plots and cut-and-tape composites onto bond, vellum or film—up to 15 copies from a single feed. Select automatic synchrocut or key in specific cut length. Make size-for-size copies up to 36 inches wide by any manageable length at a speed of four D-size copies per minute.

Roll-Fed Media Loading Is Quick And Easy. There’s a manual bypass for feeding cutsheet media. And our standard copy stacker and optional document stacker enhance operator efficiency.

Remember, your productivity is directly related to the flow of engineering information. With the 3030, drawing elements can be updated via cut-and-tape editing methods to form new concept drawings quickly, right in the drawing room. Drawings can be restored to "like new" condition, with the added storage and handling benefits of plain-paper media. The 3030 gives you added control of copy quality in terms of contrast and density. With a 3030 at your point of need, you can make sure the vital flow of engineering information won’t bog down.

• Xerox 3030 Engineering Copier Brochure (PDF, 728K)

• Interactive dual-language message display communicates the status of the copier and display instructions for operation and maintenance.
• On-board electronic Auditron with capacity for 250 individual accounts in three modes: access control, assigned account, copy inhibit.
• Partial copy enables users to reproduce only the data they need for a particular task. Only the portion containing the required data will be reproduced which will reduce the time and expense for reproduction.
• In the “Sets” mode, prints are delivered in sequence to the copy stacker conveniently located in front of the 3030, all ready to either bind or staple.

Benefits

• Walk-up engineering copier saves time, money and wasted steps
• Monochrome copies of black-and-white or color originals typically run at speeds that are up to 8 times faster and at a lower cost per copy than making additional prints on inkjets 
• Boosts productivity — makes as many as 15 copies without re-feeding your drawing
• Protects your investment in information and helps you maintain the quality of your documents 

Features

• Up to 15 copies from a single original at the rate of 4 D-size prints per minute 
• Fully automatic multiple copying 
• Dual language interactive message display gives operating status and maintenance instructions 
• Partial copy to reproduce only the image area you need 
• Programmed job selection to quickly set up and enable frequently used job applications

Key Applications

• Ideal for larger workgroups, small AEC firms, and others who produce collated sets 
• Compact footprint and quiet operation make it an easy addition to any environment 

Document Input

• Maximum Size: 
  • Single copy mode: 36" x 20' long  
  • Multi-copy mode: 36" x 60' long 
  • Optional document carrier recommended for damaged or very delicate documents 
• Minimum Size: 8 ½" x 11" (portrait) 
• Document Types: Opaque, translucent, and transparent documents (Note: A document carrier (8R3628) is recommended for damaged or very delicate documents)
• Thickness: Up to 1/8" thick 

Productivity

• Warm-up time: Less than 3 minutes from a cold start
• First-copy-out time: Less than 20 seconds for D-size (24" x 36")
• Rated speed: 15 linear feet per minute  
• Throughput (multiple copy mode): 
  • 2 E size (36" x 48") per minute
  • 4 D size (24" x 36") per minute
  • 6 C size (18" x 24") per minute
• Multiple copies: Selectable, 1-15 copies per document 

Media

• Media Types: 
  • 20 lb. xerographic bond 
  • 20 lb. xerographic Zero Solvent vellum
  • .004 drafting film 
• Media Supply: 
  • Roll stock selectable from one on-line feed roll 
  • Either 36" x 500' bond or vellum, or 36" x 150' .004 drafting film 
  • Manual bypass for special media applications

Accessories

• Data Shuttle (requires shuttle installation kit)
• Work Organizer
• Long Document Guide
• Portable Data Printer
• Document Stacker

• Dimensions (w x d x h): 57 x 27 x 46.25 in
• Weight: 500 lb